How to Photograph an Old Photo With Your Phone
A modern phone can copy a print well enough for restoration, if you control three things: light, angle and glare. This guide takes ten minutes to follow and makes a visible difference to the final result.
Why a good copy matters
Whatever you give a restoration tool is all it has to work from. Blur, glare, a tilted frame or a screenshot-sized file all remove detail that cannot be put back. Faces suffer most, because they occupy only a small part of the picture. Ten careful minutes with a phone will do more for the result than any setting later.
1. Find the right light
- Use soft daylight from a window, ideally a north-facing one or one with thin cloud outside. Direct sun creates hard shadows and glare on glossy paper.
- Turn the flash off. It produces a bright hotspot and flattens the tones.
- Switch off overhead bulbs if you can. Mixed lighting gives a colour cast that is hard to remove.
- Keep your own shadow out of the frame. Stand to one side of the window rather than between it and the print.
2. Lay the photo flat
Put the print on a plain, matte surface such as a dark tablecloth or a sheet of card. Curled prints can be held down at the corners with clean coins, but do not press hard and never flatten a brittle print by force. If the photo is in a frame, take it out only if it comes out easily. If it is stuck to the glass, leave it there and photograph through the glass at a slight angle to dodge reflections; peeling risks tearing the picture.
3. Get the phone parallel
The camera sensor should sit directly above the centre of the print, parallel to it. Any tilt makes the edges lean (a keystone effect) and part of the picture goes soft. Practical options:
- Stack books or boxes to form a bridge, rest the phone across it with the lens over a gap, and shoot with the self-timer to avoid shake.
- Use a small tripod with an overhead arm if you own one.
- Turn on the camera grid and check that the print edges line up with the grid lines.
4. Beat the glare
Glossy and silvered surfaces mirror whatever is in front of them, including you and your phone. If you see a bright patch, move the print or the light rather than the phone: rotate the print a few degrees, or tilt it so the window reflects away from the lens. Wearing dark clothing helps. For old tintypes and glass negatives, which are very reflective, a sheet of black card held beside the lens cuts the reflection of the room.
5. Focus, exposure and resolution
- Tap on the main subject's face to lock focus and exposure before you shoot.
- Do not use digital zoom. Move closer, or crop later; zooming throws away resolution.
- Shoot at the highest quality your camera offers. Do not use a low-resolution or "small file" mode.
- Take three or four frames, then pick the sharpest. Zoom into the eyes on the screen to check.
- Fill the frame with the print but keep all four edges visible, with a thin margin of surface around them.
6. Do not edit it first
Resist boosting contrast, applying a filter or running an "auto enhance". Those steps bake in clipped highlights and crushed shadows that restoration then has to treat as real. Send the plain copy. Also avoid sharing the file through a chat app before uploading, because many apps recompress images and shrink them; send the original file from your camera roll instead.
What phones cannot do
A phone is excellent for a quick, good copy, but it is not a scanner. Very small prints (wallet size, for example) have more detail than a phone can resolve at close range, so a flatbed scan is better; see our guide to how to scan old photos. Faded and very dark originals are also worth scanning, since a scanner lights the print evenly. If a print is torn into pieces, photograph the pieces together, edges touching, on a plain surface.
A quick checklist
- Daylight, no flash, no glare.
- Phone parallel to the print, edges square in the frame.
- Tap to focus on the faces; check sharpness by zooming in.
- Unedited original file, full resolution.
Once you have a clean copy, our pages on faded photos, old family photos and torn photos explain what restoration can and cannot do for each kind of damage.
Have your copy ready? Upload it and get a restored version in minutes, from $24 / £19 per photo.
Restore my photo